Dodge Dakota Exhaust System?
My truck: 1993 Dodge Dakota V8
Exhaust System: 409 Stainless Steel Mandrel bent tubing (no brand for the tubing) with a magnaflow muffler.
Magnaflow muffler: http://www.amazon.com/MagnaFlow-12158-Finish-Stainless-Muffler/dp/B001EGDXIU
My preference: Flowmaster sounds better than Magnaflow
My plan: If i keep the magnaflow muffler, im going to remove the cat, weld a straight pipe in its place, and install the cat back system i recieved with the magnaflow muffler.
Other options: Buy a flowmaster 40 series muffler for $70, and try to sell the magnaflow muffler on eBay.
Or instead of a muffler use a Y-pipe, then use 2 cheap cherrybomb glass packs as the muffler.
Questions: How easy is it to sell a magnaflow muffler on eBay? How much would I get for it at the very least.
Since Im taking off the cat, will two glasspacks be enough backpressure for the engine to run properly. Will this system even sound good or will it be too loud?
if were you id leave the cat and go with mufflers with shorter pipes on it, the shorter in length that you can make the pipes the louder and better it will sound,you can even go in front of the tires for the outlets on the pipes,id use thrush mufflers instead of a glass pack because those don’t last long enough and when they burn out they pop back through the exhaust making the truck sound like its got a cheap exhaust system on it,and thrush mufflers are cheaper to buy than magnaflow ones are also,i got two on my dakota but it has av-8 in it and they sound real good and they don’t pop back when you let off the gas either,the back pressure is what causes the popping back through the pipes,thrush mufflers wont do that,good luck.
69 Camaro W 2 1/2″ Stainless Mandrel Exhaust & Magnaflow Mufflers
|
|
BeadSmith P48B 6 to 10mm 5 Step Mandrel, Stainless Steel Beaders and wire artists alike will love this tool for its ability to create consistently sized loops, circles, and coils in wire. Features; Stainless steel, PVC Grip, and a smooth surface that will not mar wire. Measurements are: 6, 7, 8, 9, and 10mm. Color may vary. May be bulk packaged…. |
|
|
Stainless Steel Wine Stopper – Horizontal Mandrel Top shelf! Create your one wine stopper with our 100% stainless steel beadable wine stopper. Our add a bead wine stopper measures 3″ from top to bottom and has a horizontal mandrel with 2 1/2″ of beading space awaiting your inspiration! The mandrel (rod) is 3/32″ (approximately 2mm) thick and works with beads having this size hole or bigger. Visit our “Large Hole Beads” category and select Large H… |
|
|
1/16 X 12 Stainless Steel Mandrels # Come in a dozen of stainless steel Mandrels # With machine edged tips # Size 1/16′ X12″ inches # Good Quality mandrels with a nice quantity of them # Used by Lampworkers… |
|
|
SE 1.25 High Speed Saw Blade with Mandrel $5.21 Endurance blade offers faster cutting and extra long life for hobbyist. A hardened alloy steel body is used to ensure straight, accurate cuts. The features add up to a good quality blade that hobbyist can depend on, time and time again…. |
|
|
Imperial 75385 Stainless Steel Nail Rivet 1/4diax3/8grip (pack of 250) $265.99 “Imperial” Nail Rivet : Diameter: 1/4″ Head Diameter: 1/2″ Grip Range Minimum – Maximum: .251-.375 Rivet Length: .625 Shear: 1700 Tensile: 2100 Button Head Nail Rivet. Stainless Steel Rivet/Stainless Steel Mandrel. Imperial nail rivets are available in a broad variety of sizes and styles to meet the demands of virtually every application. These versatile rivets have virtually endless fast… |
|
|
Mandrel 1/4 Hole $4.91 Our high quality mandrels are made of Stainless Steel. It is used to mount accessories like Miniature Circular Saw Blades, Fiberglass Reinforced Dremel type Cut Off Wheels, etc., with a 1/4″ arbor hole size onto Rotary Hand Tools, like the Gyros PowerPro Rotary Tools and Dremel. MADE IN USA… |
|
|
2.5 Stainless Steel Straight Tubing – 2 Foot (24) $20.00 2.5″ Diameter Stainless Steel Straight Tubing, 2 foot (24″) precut section. 304 Grade / T304 SS, 16 Gauge (.065″) corrosion resistent tubing. Easy to cut and use to fab downpipes, exhaust systems, intake systems, and intercooler pipes. Made in USA to the highest quality standards…. |
|
|
2.25 Stainless Steel Straight Tubing – 2 Foot (24) $16.00 2.25″ Diameter Stainless Steel Straight Tubing, 2 foot (24″) precut section. 304 Grade / T304 SS, 16 Gauge (.065″) corrosion resistent tubing. Easy to cut and use to fab downpipes, exhaust systems, intake systems, and intercooler pipes. Made in USA to the highest quality standards…. |
|
|
3 Stainless Steel Mandrel Bend 90 Degree Elbow(3 Radius) $29.00 3″ Diameter Stainless Steel Mandrel Bent 90 degree elbow with 6″ legs. Centerline Radius 3″ (super tight radius). 304 Grade / T304 SS, 16 Gauge (.065″) corrosion resistent tubing. Easy to cut and use to fab downpipes, exhaust systems, intake systems, and intercooler pipes. Made in USA to the highest quality standards…. |
0 Comments.